Step 3: Press and hold the Power button until the Apple logo appears. Step 2: Press and release the Volume Down button. Because the chances are that your cable or accessory might be damaged. Step 1: Press and release the Volume Up button. That said, if you get the “Charging Not Available” alert every time you plug in your device to the charger, do visit a service center. When you connect a Lightning or USB-C cable or an accessory to your iPhone XS, iPhone XS Max, iPhone XR, or later, your iPhone can warn you if theres liquid in the connector. Also, do not put your iPhone in a bag of rice, as the small particles might enter your iPhone through the port and cause damage. You can use a fan to blow cool air only and direct the airflow into the Lightning connector. Do not insert anything like a cotton swab or a paper towel, into the Lightning connector. After you’ve put your iPhone in a container filled with silica gel or uncooked rice for at least 48 hours, take it out and clean it with a soft, dry cloth. Leave your iPhone in a dry, ventilated room on a dry cloth. In case you plan to manually dry your iPhone, do not your iPhone using an external heat source like a hairdryer or something similar. Put the screws in the same field of your magnetic pad. They’re to the right and left of the Lightning connector. Remove the two pentalobe screws at the bottom edge of the back cover. It could result in being unable to power your phone on. Charging when liquid is present in the port could do damage that is much more difficult to repair. This would help save your phone from damages. You need a pentalobe screwdriver (PL1) to open the iPhone Xr. This could remove the alert if it’s falsely appearing, or won’t clear even though the port is now dry. Or you can wait for some time, pat your phone dry or use a cloth to clean the accessories and the charging port. If you are in an emergency, you may still charge your iPhone using a wireless charger, if the Lightning port is wet as this does not affect wireless charging. But if there is an emergency, and you want to charge your phone immediately, you have the option of liquid detection and charge your iPhone. Dry your iPhone: Tap your iPhone gently against your hand with the connector facing down to remove excess liquid. It is common for bits of lint or rubbish to get caught in the port and compress with repeat charging. Don't plug the cable in again until your iPhone and the cable are completely dry. Inspect your charge port using a flashlight for better visibility. However, if despite repeated warnings you do not disconnect your charger, the pins on the Lightning port or the cable can corrode and cause permanent damage or stop functioning, causing connectivity issues for your iPhone or accessory. Unplug the cable from your iPhone and unplug the other end of the cable from the power adapter or accessory.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |